Extract to table

a utility outage without concurrent generator failure), only one side is required to carry the full building load; the second side provides complete redundancy and is available as a backup to the backup

Generator Sizing Per Building The generator sizing for each building is driven by the total electrical load that the generators must support during a utility outage

Under the 2N architecture, each "N" side (A-side and B-side) must independently provide generator capacity of approximately 30 MW

The ATS systems are the critical interface between the utility power feed and the generator plant and must be designed, procured, and commissioned as an integrated system with the generators and the broader electrical distribution infrastructure

All diesel generators installed at the Campus must comply with EPA Tier 4 Final emission standards for compression-ignition internal combustion engines, as codified in 40 CFR Part 1039

This start-to-load time is a critical performance parameter that directly affects the duration for which the UPS battery systems must bridge the gap between utility power loss and generator power availability